Work in Progress: Voyager Desktop Computer

tn_voy_desktop_wip

Following my recent “show-off” post presenting my Voyager Desktop Computer, let’s now have a detailed look at how I built this prop, going through every step, from the raw parts all the way to the finished unit, covering the concepts of different aspects of the prop, the construction of several custom parts, the installation of the electronics and the assembly of everything to bring it all together. Although I didn’t snap an image of every step along the way, it’s more than a hundred progress pictures, so I hope you brought a little time… [More…]

Tools & Supplies: 5-Minute Epoxy Glue

For parts which are supposed to be joined together permanently I use 5-minute epoxy glue, which is mixed from two components. The working life is – guess what – 5 minutes after which the glued parts are nearly inseperable without destroying them in the process. Be cautious: Always wear protective gloves to ensure that your skin doesn’t come in contact with this chemical! [More…]

Tutorial: ODN Scanner Kit Assembly

tn_tut_odn_scanner_kitWelcome to the online assembly instructions for my ODN scanner hero kit. In this tutorial, you’ll see how to prepare the electronics for installation and how to insert them into the body. You’ll also learn how to prepare and assemble the hollow resin shells to build up a fully functional hero ODN scanner. First, here’s a pic of the entire kit: 2 resin body parts, electronics, acrylic rod, display graphics, styrene (1.0 mm and 1.5 mm), 2 screws, templates for the styrene details. That’s all you need, so let’s begin! [More…]

Buildup: Small PADD (VOY)

tn_voy_padd_sHow do you build a PADD? Well, it’s easy, if you have the right kit. In this tutorial I want to show you how to build up one of Matt Munson’s small Voyager PADD kits. Although he claims to build these is under an hour, I would recommend to take a little more time… [More…]